Products

Blocked Chute Protection Switches

BCP10 Pull rope switch

The two-way rope pulling switch is installed on both sides of the belt conveyor, and the switch is linked by a wire rope along the conveyor. When the conveyor needs emergency braking, the wire rope can be pulled anywhere in the field, the

More Information


Blocked Chute Protection Switches

BCP40 Chute anti blocking switch

The chute jam switch is installed on the side wall of the secondary chute of the conveying equipment. When the chute is blocked, the detection board of the chute blocking the switch is swinging outward and the output signal of the limit sw

More Information


Blocked Chute Protection Switches

BCP50 Speed monitor

The speed monitor uses the sensor to collect the velocity signal and process the signal, then completes the test record function and achieves the speed monitoring and control. Monitoring rotational motion, linear motion and all physical un

More Information


Blocked Chute Protection Switches

BCP60 Tilt switch

The tilt switch is mounted on the stainless steel chain, and when the material contacts the switch and the switch tilts to 20 degrees, it outputs the signal. The tilt switch has strong wear resistance and strong resistance. It is widely us

More Information


Blocked Chute Protection Switches

BCP70 Address encoder

The address encoder is an electronic single chip address coding module, which is a device for communicating with the upper computer in various protection devices in the belt conveying system. It is suitable for remote monitoring of long di

More Information


Blocked Chute Protection Switches

BCP80 Acousto-optic alarm

Industrial acousto-optic alarm can be used to send alarm signals to operators in time to avoid and evacuate safely. It is suitable for noisy industrial environment, wharf, mine and other operation sites, and other fire prevention or disast

More Information


Blocked Chute Protection Switches

BCP30 Deviation switch

The full - direction pressure sensor with high sensitivity can accurately and quickly detect the longitudinal crack caused by iron sheet, iron rod, wood and other foreign objects, and can stop the conveyor immediately and reduce the damage

More Information


  • Total 1Page7Records

©2013 Solidat Applied Technologies Ltd. All rights reserved. manager@solidat.net.