Products

Blocked Chute Protection Switches

SLDF7120 (Split type) electromagnetic flowmeter

Type:SLDF7120 (split type) Nominal diameter: 15~2000mm Flow rate range: 0-10m/s Accuracy: 0.5%R, 1% (DN20 or less) Medium conductivity: theoretical value 5uS/cm, actual use 30uS/cm Nominal pressure: optional 2.5MPa DN15-DN600 Optional 4.0M

More Information


Blocked Chute Protection Switches

Mass flow meter SLDF3000

To measure fluid flow rate, density and temperature online at actual time and also can calculate the flow rate and cumulative parameters such as quality, cumulative volume flow rate and composition proportion at the same time.

More Information


Blocked Chute Protection Switches

SLDP3351 Series MonoSlicon

SLDP3351-DR Micro differential pressure transmitter SLDP3351-DP High precision differential pressure transmitter SLDP3351-DX Large range differential pressure transmitter SLDP3351-GP High precision pressure transmitter SLDP3351-HP High sta

More Information


Blocked Chute Protection Switches

SLDOP&CT Multi-turn Electric Actuator

Type:SLDOPCT Output torque: 35-3000Nm direct drive Output turns: 2.5-8000 cycles Speed (rmp): 18-192@50Hz, 21-230@60Hz Protection class: IP68, 15 meters underwater, 72 hours no leakage Ambient temperature: -30C~+70C Relative humidity: 95%,

More Information


Blocked Chute Protection Switches

OPQTEX Safety and flame-proof series

Ex d II B/CT4 T6GB£¨GB3836.1-2010;GB3836.2-2010;EN60079-0;EN60079-1£© DIP A21 TA£¬T4£¨According to EN60079-0;EN60079-1£© Ex tB III C T85¡æ~T135¡æ£¨According to EN60079-0£»EN60079-1

More Information


Blocked Chute Protection Switches

SLDV1500 Fluorine Fluorescent Disc Valve (DN50~DN300)

Nominal size range: V1502-V1512 (DN50-DN300) Structure length: EN 558Series 20 DIN 3202 T3 K1 API 609 T1 ISO 5752 Series 20 GB/T 12221 Connection Flange: BS EN 1092 Table 8 Table 9 DIN 2501 PN 10/16 ANSI B16.5 Class 150 AWWA C207 Class B C

More Information


Blocked Chute Protection Switches

SLDV1600 wire disc valve (DN50~DN300)

Nominal size range: V1602-V1612 (DN50-DN300) Structure length: ISO 57520 GB/T 12221 ASME B16.10 BS EN558-1 DIN 3032 JIS B2002 Connection flange: ISO 7005 GB/T 17214 ASME B16.1 ASME B16.5 BS EN1092 GB/T9113 DIN 2501 JIS2211-2212 Drive conne

More Information


Blocked Chute Protection Switches

BCP10 Pull rope switch

The two-way rope pulling switch is installed on both sides of the belt conveyor, and the switch is linked by a wire rope along the conveyor. When the conveyor needs emergency braking, the wire rope can be pulled anywhere in the field, the

More Information


Blocked Chute Protection Switches

BCP40 Chute anti blocking switch

The chute jam switch is installed on the side wall of the secondary chute of the conveying equipment. When the chute is blocked, the detection board of the chute blocking the switch is swinging outward and the output signal of the limit sw

More Information


Blocked Chute Protection Switches

BCP50 Speed monitor

The speed monitor uses the sensor to collect the velocity signal and process the signal, then completes the test record function and achieves the speed monitoring and control. Monitoring rotational motion, linear motion and all physical un

More Information


©2013 Solidat Applied Technologies Ltd. All rights reserved. manager@solidat.net.